1988 Acura Integra tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1988 Acura Integra.

1988 Acura Integra tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1986 – 1989 USA market 3 trims

84 hp · I4 185/70 R13 85S 2 fitments

GenerationAV 1986–1989

Power84 hp

EngineI4, Petrol

Center bore56.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
185/70 R13 85S	13x5 ET40 ~~4x100~~	29	Tires Rims
185/65 R14 85H	14x5.5 ET40 ~~4x100~~	29	Tires Rims

99 hp · I4 185/65 R14 85H 2 fitments

GenerationAV 1986–1989

Power99 hp

EngineI4, Petrol

Center bore56.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
185/65 R14 85H	14x5.5 ET40 ~~4x100~~	29	Tires Rims
195/55 R15 85H	15x6 ET40 ~~4x100~~	30	Tires Rims

118 hp · I4 195/60 R14 85H 3 fitments

GenerationAV 1986–1989

Power118 hp

EngineI4, Petrol

Center bore56.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
195/60 R14 85H	14x5.5 ET40 ~~4x100~~	29	Tires Rims
195/55 R15 85H	15x6 ET42 ~~4x100~~	30	Tires Rims
205/45 R16 85H	16x6.5 ET38 ~~4x100~~	30	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.