Skip to content

2024 Acura TLX tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2024 Acura TLX.

2024 Acura TLX tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2024

Open a trim for its factory package and every alternative size, front and rear.

Acura TLX II (UB5/UB6/UB7) Facelift

2024 – 2025 2 trims

TLX 2.0T (Saloon)

272 hp · 2.0 L K20C6 I4 Petrol 2.0 L K20C6 I4 235/50 R18 3 fitments
GenerationII (UB5/UB6/UB7) Facelift 2024–2025
MarketUSA
Power272 hp
Engine2.0 L K20C6 I4 Petrol 2.0 L K20C6 I4, Petrol
Center bore64.1 mm
PCD5x120
ThreadM14 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE235/50 R1818x8 ET50 5x12032 F / 30 RTiresRims
OE255/40 ZR1919x8.5 ET50 5x12032TiresRims
OE255/35 ZR2020x9 ET50 5x120–TiresRims

TLX 3.0T (Saloon)

350 hp · 3.0 L J30AC V6 Petrol 3.0 L J30AC V6 255/35 ZR20 2 fitments
GenerationII (UB5/UB6/UB7) Facelift 2024–2025
MarketMexico
Power350 hp
Engine3.0 L J30AC V6 Petrol 3.0 L J30AC V6, Petrol
Center bore64.1 mm
PCD5x120
ThreadM14 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE255/35 ZR2020x9 ET50 5x12036 F / 33 RTiresRims
Alt255/40 ZR1919x8.5 ET50 5x12032TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.