Skip to content

2026 Aito M8 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2026 Aito M8.

Bolt pattern
Fitment tables

2 trims sold in 2026

Open a trim for its factory package and every alternative size, front and rear.

Aito M8 M8

2025 – 2027 2 trims

M8 1.5T EVR (SUV, 5d)

526 hp · 1.5 L Hybrid 1.5 L 255/50 R20 / 275/50 R20 3 fitments
GenerationM8 2025–2027
MarketChina
Power526 hp
Engine1.5 L Hybrid 1.5 L, Hybrid
Center bore66.1 mm
PCD5x120
ThreadM14 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OEFront255/50 R2020x8.5 ET35 5x120–TiresRims
Rear275/50 R2020x8.5 ET35 5x120–TiresRims
OEFront265/45 R2121x9 ET35 5x120–TiresRims
Rear285/45 R2121x9 ET35 5x120–TiresRims
AltFront265/40 R2222x9.5 ET38 5x120–TiresRims
Rear285/40 R2222x9.5 ET38 5x120–TiresRims

M8 EV (SUV, 5d)

304 hp · Electric 255/50 R20 / 275/50 R20 3 fitments
GenerationM8 2025–2027
MarketChina
Power304 hp
EngineElectric, Electric
Center bore66.1 mm
PCD5x120
ThreadM14 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OEFront255/50 R2020x8.5 ET35 5x120–TiresRims
Rear275/50 R2020x8.5 ET35 5x120–TiresRims
OEFront265/45 R2121x9 ET35 5x120–TiresRims
Rear285/45 R2121x9 ET35 5x120–TiresRims
AltFront265/40 R2222x9.5 ET38 5x120–TiresRims
Rear285/40 R2222x9.5 ET38 5x120–TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.