Skip to content
tirewheelguide.com

1985 Alfa Romeo Alfa 6 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1985 Alfa Romeo Alfa 6.

1985 Alfa Romeo Alfa 6 tire sizes

195/70RH14195/65RH15205/60RH15205/55RV16
Bolt pattern
Other years
19791980198119821983198419851986 All 1979–1986
Fitment tables

3 trims sold in 1985

Open a trim for its factory package and every alternative size, front and rear.

Alfa Romeo Alfa 6 119

1979 – 1986 Europe market 3 trims

Alfa 6 2.0

133 hp · AR01932 V6 195/70 HR14 4 fitments
Generation119 1979–1986
Power133 hp
EngineAR01932 V6, Petrol
Center bore58.1 mm
PCD5x112
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
195/70 HR1414x6 ET45 5x11229TiresRims
195/65 HR1515x6 ET45 5x11229TiresRims
205/60 HR1515x6 ET45 5x11229TiresRims
205/55 VR1616x6.5 ET45 5x11229TiresRims

Alfa 6 2.5

156 hp · AR01928 V6 195/70 HR14 4 fitments
Generation119 1979–1986
Power156 hp
EngineAR01928 V6, Petrol
Center bore58.1 mm
PCD5x112
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
195/70 HR1414x6 ET45 5x11229TiresRims
195/65 HR1515x6 ET45 5x11229TiresRims
205/60 HR1515x6 ET45 5x11229TiresRims
205/55 VR1616x6.5 ET45 5x11229TiresRims

Alfa 6 2.5TD

103 hp · VM-HR 588 HT I5 195/70 HR14 4 fitments
Generation119 1979–1986
Power103 hp
EngineVM-HR 588 HT I5, Diesel
Center bore58.1 mm
PCD5x112
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
195/70 HR1414x6 ET45 5x11229TiresRims
195/65 HR1515x6 ET45 5x11229TiresRims
205/60 HR1515x6 ET45 5x11229TiresRims
205/55 VR1616x6.5 ET45 5x11229TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.

Open the size calculator
Recent articles

Guides worth reading first

All articles
Basics

How to read a tire sidewall

Reading a tire sidewall is easy. Find out what the size, load index, speed rating and date code mean.

Continue reading
Guide

Everything you need to know about tire tread depth

Tire tread depth is an important factor in keeping your vehicle safe — how to measure it and when to replace.

Continue reading
Gear

Best supercapacitor jump starter review

We tested seven supercapacitor jump starters to find the ones worth buying.

Continue reading