1977 Alfa Romeo Giulietta tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1977 Alfa Romeo Giulietta.

1977 Alfa Romeo Giulietta tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1977 – 1985 Europe market 2 trims

89 hp · AR01644 I4 165x SR13 3 fitments

Generation116 1977–1985

Power89 hp

EngineAR01644 I4, Petrol

Center bore58.6 mm

PCD4x98

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
165x SR13	13x5.5 ET38 ~~4x98~~	2	Tires Rims
185/70 SR13	13x5.5 ET38 ~~4x98~~	2	Tires Rims
185/65 SR14	14x5.5 ET38 ~~4x98~~	2	Tires Rims

106 hp · AR01600 I4 165x SR13 3 fitments

Generation116 1977–1985

Power106 hp

EngineAR01600 I4, Petrol

Center bore58.6 mm

PCD4x98

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
165x SR13	13x5.5 ET38 ~~4x98~~	2	Tires Rims
185/70 SR13	13x5.5 ET38 ~~4x98~~	2	Tires Rims
185/65 SR14	14x6 ET38 ~~4x98~~	2	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.