Skip to content

1970 Alfa Romeo GT tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1970 Alfa Romeo GT.

1970 Alfa Romeo GT tire sizes

Bolt pattern
Fitment tables

5 trims sold in 1970

Open a trim for its factory package and every alternative size, front and rear.

Alfa Romeo GT 105/115

1963 – 1977 Europe market 5 trims

GT 1300

86 hp · AR00530 I4 185/70 R14 88H 2 fitments
Generation105/115 1963–1977
Power86 hp
EngineAR00530 I4, Petrol
Center bore63.4 mm
PCD4x108
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
185/70 R14 88H14x5.5 ET38 4x10829TiresRims
195/60 R15 88H15x6 ET38 4x10829TiresRims

GT 1600

101 hp · AR00526 I4 185/70 R14 88H 2 fitments
Generation105/115 1963–1977
Power101 hp
EngineAR00526 I4, Petrol
Center bore63.4 mm
PCD4x108
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
185/70 R14 88H14x5.5 ET38 4x10829TiresRims
195/60 R15 88H15x6 ET38 4x10829TiresRims

GT 1600

107 hp · AR00536 I4 185/70 R14 88H 2 fitments
Generation105/115 1963–1977
Power107 hp
EngineAR00536 I4, Petrol
Center bore63.4 mm
PCD4x108
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
185/70 R14 88H14x5.5 ET38 4x10829TiresRims
195/60 R15 88H15x6 ET38 4x10829TiresRims

GT A 1600

111 hp · AR10538 I4 185/70 R14 88H 2 fitments
Generation105/115 1963–1977
Power111 hp
EngineAR10538 I4, Petrol
Center bore63.4 mm
PCD4x108
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
185/70 R14 88H14x5.5 ET38 4x10829TiresRims
195/60 R15 88H15x6 ET38 4x10829TiresRims

GT V 1750

111 hp · 1.8L AR00548 I4 185/70 R14 88H 2 fitments
Generation105/115 1963–1977
Power111 hp
Engine1.8L AR00548 I4, Petrol
Center bore63.4 mm
PCD4x108
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
185/70 R14 88H14x5.5 ET38 4x10829TiresRims
195/60 R15 88H15x6 ET38 4x10829TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.