1974 Alpine A110 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1974 Alpine A110.

1974 Alpine A110 tire sizes

185/65R14

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1961 – 1977 2 trims

67 hp · 1.3L I4 145x HR13 2 fitments

GenerationA110 1961–1977

Power67 hp

Engine1.3L I4, Petrol

Center bore60.1 mm

PCD4x140

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
145x HR13	13x4.5 ET10 ~~4x140~~	2.2	Tires Rims
165x HR13	13x5 ET10 ~~4x140~~	2.2	Tires Rims

94 hp · 1.65L A6M I4 165x HR13 2 fitments

GenerationA110 1961–1977

Power94 hp

Engine1.65L A6M I4, Petrol

Center bore60.1 mm

PCD4x140

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
165x HR13	13x5 ET10 ~~4x140~~	2.2	Tires Rims
185/65 R14	14x6 ET0 ~~4x140~~	2.4	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.