1976 Alpine A310 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1976 Alpine A310.

1976 Alpine A310 tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1971 – 1985 Europe market 2 trims

125 hp · 1.6L A3L I4 185/70 HR13 1 fitment

GenerationI 1971–1985

Power125 hp

Engine1.6L A3L I4, Petrol

Center boreN/A

PCD4x140

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
185/70 HR13	13x6.5 ~~4x140~~	2.2	Tires Rims

95 hp · 1.65L A6M I4 165/80 HR13 1 fitment

GenerationI 1971–1985

Power95 hp

Engine1.65L A6M I4, Petrol

Center boreN/A

PCD4x140

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
165/80 HR13	13x6.5 ~~4x140~~	2.2	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.