1985 Alpine A310 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1985 Alpine A310.

1985 Alpine A310 tire sizes

Bolt patterns

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1971 – 1985 Europe market 3 trims

148 hp · 2.7L PRV V6 190/55 VR13 / 220/55 VR14 1 fitment

GenerationI 1971–1985

Power148 hp

Engine2.7L PRV V6, Petrol

Center boreN/A

PCD3x150

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
Front190/55 VR13	13x5.3 ~~3x150~~	22	Tires Rims
Rear220/55 VR14	14x7.7 ~~3x150~~	29	Tires Rims

148 hp · 2.7L PRV I4 205/50 VR15 / 285/40 VR15 1 fitment

GenerationI 1971–1985

Power148 hp

Engine2.7L PRV I4, Petrol

Center bore60.1 mm

PCD4x98

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
Front205/50 VR15	15x7.5 ~~4x98~~	25	Tires Rims
Rear285/40 VR15	15x10 ~~4x98~~	35	Tires Rims

193 hp · 2.9L PRV V6 205/50 VR15 1 fitment

GenerationI 1971–1985

Power193 hp

Engine2.9L PRV V6, Petrol

Center bore60.1 mm

PCD4x98

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/50 VR15	15x10 10J ~~4x98~~	2.4	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.