1992 Alpine A610 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1992 Alpine A610.

1992 Alpine A610 tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1991 – 1995 Europe market 1 trim

247 hp · I4 205/45 VR16 / 245/45 VR16 2 fitments

GenerationI 1991–1995

Power247 hp

EngineI4, Petrol

Center bore60.1 mm

PCD5x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
Front205/45 VR16	16x6.5 ET40 ~~5x100~~	29	Tires Rims
Rear245/45 VR16	16x8.5 ET20 ~~5x100~~	35	Tires Rims
Front215/40 ZR16	16x7 ET35 ~~5x100~~	29	Tires Rims
Rear255/40 ZR17	17x9 ET15 ~~5x100~~	35	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.