1985 Alpine GTA tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1985 Alpine GTA.

1985 Alpine GTA tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1985 – 1991 Europe market 2 trims

197 hp · I4 195/50 VR15 / 255/45 VR15 2 fitments

GenerationI 1985–1991

Power197 hp

EngineI4, Petrol

Center bore60.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
Front195/50 VR15	15x6 ET40 ~~4x100~~	26	Tires Rims
Rear255/45 VR15	15x8 ET20 ~~4x100~~	32	Tires Rims
Front205/45 ZR16	16x6.5 ET35 ~~4x100~~	29	Tires Rims
Rear245/45 ZR16	16x8.5 ET15 ~~4x100~~	35	Tires Rims

160 hp · V6 190/55 VR15 / 220/55 VR15 2 fitments

GenerationI 1985–1991

Power160 hp

EngineV6, Petrol

Center bore60.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
Front190/55 VR15	15x6 ET40 ~~4x100~~	26	Tires Rims
Rear220/55 VR15	15x7 ET20 ~~4x100~~	32	Tires Rims
Front195/45 ZR16	16x6.5 ET40 ~~4x100~~	29	Tires Rims
Rear225/45 ZR16	16x7.5 ET20 ~~4x100~~	35	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.