1983 ARO 10 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1983 ARO 10.

1983 ARO 10 tire sizes

195/75R14 205/65R15

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1980 – 2006 Europe market 1 trim

54 hp · I4 175x R14 88Q 3 fitments

GenerationI 1980–2006

Power54 hp

EngineI4, Petrol

Center bore69.1 mm

PCD3x150

ThreadM14 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
175x R14 88Q	14x5 ET18 ~~3x150~~	26	Tires Rims
195/75 R14 88S	14x5.5 ET15 ~~3x150~~	28	Tires Rims
205/65 R15 87S	15x6 ET15 ~~3x150~~	29	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.