1980 Aston Martin Bulldog tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1980 Aston Martin Bulldog.

1980 Aston Martin Bulldog tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1979 – 1982 Europe market 1 trim

599 hp · V8 235/40 R19 / 275/35 R19 2 fitments

GenerationMP 1979–1982

Power599 hp

EngineV8, Petrol

Center bore68.1 mm

PCD5x114.3

Thread1/2" - 20 UNF

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
Front235/40 R19	19x8.5 ET25 ~~5x114.3~~	–	Tires Rims
Rear275/35 R19	19x9.5 ET20 ~~5x114.3~~	–	Tires Rims
Front245/35 R20	20x9 ET26 ~~5x114.3~~	–	Tires Rims
Rear275/30 R20	20x10.5 ET24 ~~5x114.3~~	–	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.