Skip to content

2004 Aston Martin DB9 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2004 Aston Martin DB9.

Bolt pattern
Fitment tables

3 trims sold in 2004

Open a trim for its factory package and every alternative size, front and rear.

Aston Martin DB9 VH

2004 – 2016 Europe market 3 trims

DB9 5.9i

473 hp · 5.9L AM11 V12 245/35 ZR20 95Y / 295/30 ZR20 101Y 2 fitments
GenerationVH 2004–2016
Power473 hp
Engine5.9L AM11 V12, Petrol
Center bore68.1 mm
PCD5x114.3
ThreadM14 x 2.0
Tire sizeRim size and bolt patternPressure, psiPrices
Front245/35 ZR20 95Y20x8.5 ET50 5x114.338TiresRims
Rear295/30 ZR20 101Y20x10.5 ET60 5x114.339TiresRims
Front255/30 ZR21 91Z21x9 ET45 5x114.338TiresRims
Rear305/25 ZR21 95Z21x11 ET55 5x114.341TiresRims

DB9 5.9i

450 hp · 5.9L AM11 V12 235/40 ZR19 92Y / 275/35 ZR20 96Y 2 fitments
GenerationVH 2004–2016
Power450 hp
Engine5.9L AM11 V12, Petrol
Center bore68.1 mm
PCD5x114.3
ThreadM14 x 2.0
Tire sizeRim size and bolt patternPressure, psiPrices
Front235/40 ZR19 92Y19x8.5 ET50.3 5x114.336TiresRims
Rear275/35 ZR20 96Y20x9.5 ET62.5 5x114.338TiresRims
Front245/35 ZR20 95Y20x8.5 ET50 5x114.338TiresRims
Rear295/30 ZR20 101Y20x10.5 ET60 5x114.339TiresRims

DB9 5.9i

444 hp · 5.9L AM11 V12 235/40 ZR19 92Y 2 fitments
GenerationVH 2004–2016
Power444 hp
Engine5.9L AM11 V12, Petrol
Center bore68.1 mm
PCD5x114.3
ThreadM14 x 2.0
Tire sizeRim size and bolt patternPressure, psiPrices
235/40 ZR19 92Y20x9.5 ET62.5 5x114.32.6TiresRims
245/35 ZR20 95Y20x10.5 ET60 5x114.32.7TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.