2011 Aston Martin DBS tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2011 Aston Martin DBS.

2011 Aston Martin DBS tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2007 – 2012 Europe market 1 trim

510 hp · 5.9L AM11 V12 245/35 ZR20 95Y / 295/30 ZR20 101Y 2 fitments

GenerationVH 2007–2012

Power510 hp

Engine5.9L AM11 V12, Petrol

Center bore68.1 mm

PCD5x114.3

ThreadM14 x 2.0

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
Front245/35 ZR20 95Y	20x8.5 ET42 ~~5x114.3~~	38	Tires Rims
Rear295/30 ZR20 101Y	20x11 ET54 ~~5x114.3~~	39	Tires Rims
Front245/30 ZR21 95Z	21x8.5 ET42 ~~5x114.3~~	38	Tires Rims
Rear295/25 ZR21 99Z	21x11 ET54 ~~5x114.3~~	41	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.