2010 Aston Martin One-77 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2010 Aston Martin One-77.

2010 Aston Martin One-77 tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2009 – 2012 Europe market 1 trim

750 hp · 7.3L AM Cosworth V12 255/35 ZR20 97Y / 335/30 ZR20 104Y 2 fitments

GenerationVH 2009–2012

Power750 hp

Engine7.3L AM Cosworth V12, Petrol

Center bore75.1 mm

PCD5x128

ThreadM14 x 2.0

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
Front255/35 ZR20 97Y	20x9 ET44 ~~5x128~~	36	Tires Rims
Rear335/30 ZR20 104Y	20x12.5 ET66 ~~5x128~~	36	Tires Rims
Front245/40 R20 95W	20x8.5 ET42.1 ~~5x128~~	36	Tires Rims
Rear295/35 R20 105W	20x11 ET47.9 ~~5x128~~	36	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.