2010 Aston Martin Rapide tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2010 Aston Martin Rapide.

2010 Aston Martin Rapide tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2010 – 2014 Europe market 1 trim

469 hp · 5.9L AM11 V12 245/40 ZR20 95Y / 295/35 ZR20 105Y 2 fitments

GenerationVH 2010–2014

Power469 hp

Engine5.9L AM11 V12, Petrol

Center bore75.1 mm

PCD5x128

ThreadM14 x 2.0

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
Front245/40 ZR20 95Y	20x8.5 ET42.1 ~~5x128~~	36	Tires Rims
Rear295/35 ZR20 105Y	20x11 ET47.9 ~~5x128~~	38	Tires Rims
Front245/35 ZR21 96Y	21x8.5 ET42.1 ~~5x128~~	38	Tires Rims
Rear295/30 ZR21 102Y	21x11 ET47.9 ~~5x128~~	38	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.