1983 Aston Martin V8 Vantage tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1983 Aston Martin V8 Vantage.

1983 Aston Martin V8 Vantage tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1977 – 1990 Europe market 1 trim

296 hp · 5.3L V8 225/70 R15 101V 8 fitments

GenerationMP 1977–1990

Power296 hp

Engine5.3L V8, Petrol

Center bore73.8 mm

PCD5x120.65

Thread1/2" - 20 UNF

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
225/70 R15 101V	15x7 ET30 ~~5x120.65~~	30	Tires Rims
255/60 R15 101V	15x7 ET30 ~~5x120.65~~	33	Tires Rims
225/65 R16 99V	16x7 ET30 ~~5x120.65~~	33	Tires Rims
255/55 R16 99V	16x7.5 ET33 ~~5x120.65~~	36	Tires Rims
225/60 R17 98V	17x7 ET30 ~~5x120.65~~	33	Tires Rims
255/50 R17 98V	17x7.5 ET33 ~~5x120.65~~	36	Tires Rims
225/55 R18 97V	18x7.5 ET33 ~~5x120.65~~	36	Tires Rims
265/45 ZR18 95Z	18x8 ET28 ~~5x120.65~~	39	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.