1988 Aston Martin V8 Virage tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1988 Aston Martin V8 Virage.

1988 Aston Martin V8 Virage tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1988 – 1996 Europe market 1 trim

325 hp · 5.3L V8 255/60 R16 103V 4 fitments

GenerationMP 1988–1996

Power325 hp

Engine5.3L V8, Petrol

Center bore73.8 mm

PCD5x120.65

Thread1/2" - 20 UNF

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
255/60 R16 103V	16x7 ET30 ~~5x120.65~~	30	Tires Rims
255/55 R17 102V	17x8 ET25 ~~5x120.65~~	36	Tires Rims
255/50 ZR18 102W	18x8 ET25 ~~5x120.65~~	36	Tires Rims
255/45 ZR19 101Y	19x8.5 ET23 ~~5x120.65~~	36	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.