2007 Aston Martin Vanquish S tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2007 Aston Martin Vanquish S.

2007 Aston Martin Vanquish S tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2004 – 2007 Europe market 1 trim

520 hp · 5.9L AM11 V12 255/40 ZR19 96Y / 285/40 ZR19 103Y 2 fitments

GenerationNP 2004–2007

Power520 hp

Engine5.9L AM11 V12, Petrol

Center bore63.4 mm

PCD5x108

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
Front255/40 ZR19 96Y	19x9 ET45 ~~5x108~~	38	Tires Rims
Rear285/40 ZR19 103Y	19x10 ET55 ~~5x108~~	38	Tires Rims
Front255/35 ZR20 97Y	20x9.5 ET45 ~~5x108~~	39	Tires Rims
Rear295/35 ZR20 101Y	20x10.5 ET55 ~~5x108~~	39	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.