Skip to content

2020 Aston Martin Vantage tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2020 Aston Martin Vantage.

2020 Aston Martin Vantage tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2020

Open a trim for its factory package and every alternative size, front and rear.

Aston Martin Vantage AM6

2018 – 2024 2 trims

Vantage 4.0 twin-turbo

528 hp · 4.0L M177 V8 255/35 ZR21 98Y / 295/30 ZR21 102Y 1 fitment
GenerationAM6 2018–2024
Power528 hp
Engine4.0L M177 V8, Petrol
Center bore75.1 mm
PCD5x128
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
Front255/35 ZR21 98Y 5x128–Tires
Rear295/30 ZR21 102Y 5x128–Tires

Vantage 4.0 twin-turbo

503 hp · 4.0L M177 V8 255/40 ZR20 101Y / 295/35 ZR20 105Y 2 fitments
GenerationAM6 2018–2024
Power503 hp
Engine4.0L M177 V8, Petrol
Center bore75.1 mm
PCD5x128
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
Front255/40 ZR20 101Y20x9 ET48 5x12836TiresRims
Rear295/35 ZR20 105Y20x11 ET55 5x12836TiresRims
Front255/35 ZR21 98Y21x9 ET45 5x12836TiresRims
Rear305/30 ZR21 104Y21x11.5 ET55 5x12836TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.