Skip to content

1984 Audi 100 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1984 Audi 100.

1984 Audi 100 tire sizes

Bolt pattern
Fitment tables

5 trims sold in 1984

Open a trim for its factory package and every alternative size, front and rear.

Audi 100 C3

1982 – 1991 5 trims

100 1.8

74 hp · I4 185/70 R14 88H 2 fitments
GenerationC3 1982–1991
Power74 hp
EngineI4, Petrol
Center bore57.1 mm
PCD4x108
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
185/70 R14 88H14x6 ET45 4x1082TiresRims
205/60 R15 91V15x6.5 ET45 4x10830TiresRims

100 2.0

114 hp · I5 185/70 R14 88H 2 fitments
GenerationC3 1982–1991
Power114 hp
EngineI5, Petrol
Center bore57.1 mm
PCD4x108
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
185/70 R14 88H14x6 ET45 4x1082TiresRims
205/60 R15 91V15x6.5 ET45 4x10830TiresRims

100 2.0 D

68 hp · I5 185/70 R14 88H 2 fitments
GenerationC3 1982–1991
Power68 hp
EngineI5, Diesel
Center bore57.1 mm
PCD4x108
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
185/70 R14 88H14x6 ET45 4x1082TiresRims
205/60 R15 91V15x6.5 ET45 4x10830TiresRims

100 2.0 TD

86 hp · I5 185/70 R14 88H 2 fitments
GenerationC3 1982–1991
Power86 hp
EngineI5, Diesel
Center bore57.1 mm
PCD4x108
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
185/70 R14 88H14x6 ET45 4x1082TiresRims
205/60 R15 91V15x6.5 ET45 4x10830TiresRims

100 2.2

114 hp · I5 185/70 R14 88H 2 fitments
GenerationC3 1982–1991
Power114 hp
EngineI5, Petrol
Center bore57.1 mm
PCD4x108
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
185/70 R14 88H14x6 ET45 4x1082TiresRims
205/60 R15 91V15x6.5 ET45 4x10830TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.