Skip to content

1985 Audi 5000 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1985 Audi 5000.

1985 Audi 5000 tire sizes

Bolt pattern
Fitment tables

2 trims sold in 1985

Open a trim for its factory package and every alternative size, front and rear.

Audi 5000 C3

1984 – 1990 2 trims

5000 2.1 Turbo

139 hp · I5 195/65 R15 91H 3 fitments
GenerationC3 1984–1990
Power139 hp
EngineI5, Petrol
Center bore57.1 mm
PCD5x112
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
195/65 R15 91H15x7 ET35 5x112TiresRims
205/60 R15 90V15x7 ET35 5x11230TiresRims
215/60 ZR15 94Z15x7.5 ET35 5x11235TiresRims

5000 2.2

115 hp · I5 195/65 R15 91H 3 fitments
GenerationC3 1984–1990
Power115 hp
EngineI5, Petrol
Center bore57.1 mm
PCD5x112
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
195/65 R15 91H15x7 ET35 5x112TiresRims
205/60 R15 90V15x7 ET35 5x11230TiresRims
215/60 ZR15 94Z15x7.5 ET35 5x11235TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.