Skip to content

1977 Audi 80 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1977 Audi 80.

Fitment tables

5 trims sold in 1977

Open a trim for its factory package and every alternative size, front and rear.

Audi 80 B1 Facelift

1976 – 1978 5 trims

80 1.3

54 hp · ZA I4 155/80 R13 4 fitments
GenerationB1 Facelift 1976–1978
Power54 hp
EngineZA I4, Petrol
Center bore57.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
155/80 R1313x4.5 ET45 4x100TiresRims
155x SR1313x5 ET45 4x100TiresRims
175/70 R1313x5 ET45 4x100TiresRims
185/65 R1414x5.5 ET45 4x100TiresRims

80 1.3

59 hp · ZF I4 155/80 R13 4 fitments
GenerationB1 Facelift 1976–1978
Power59 hp
EngineZF I4, Petrol
Center bore57.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
155/80 R1313x4.5 ET45 4x100TiresRims
155x SR1313x5 ET45 4x100TiresRims
175/70 R1313x5 ET45 4x100TiresRims
185/65 R1414x5.5 ET45 4x100TiresRims

80 1.6

84 hp · YP I4 175/70 SR13 3 fitments
GenerationB1 Facelift 1976–1978
Power84 hp
EngineYP I4, Petrol
Center bore57.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
175/70 SR1313x5 ET45 4x100TiresRims
185/65 R1414x5.5 ET45 4x100TiresRims
195/55 R1515x6 ET45 4x100TiresRims

80 1.6

74 hp · YN I4 155x SR13 4 fitments
GenerationB1 Facelift 1976–1978
Power74 hp
EngineYN I4, Petrol
Center bore57.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
155x SR1313x5 ET45 4x100TiresRims
175/70 SR1313x5 ET45 4x100TiresRims
185/65 R1414x5.5 ET45 4x100TiresRims
195/55 R1515x6 ET45 4x100TiresRims

80 1.6

109 hp · YS I4 175/70 HR13 3 fitments
GenerationB1 Facelift 1976–1978
Power109 hp
EngineYS I4, Petrol
Center bore57.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
175/70 HR1313x5 ET45 4x100TiresRims
185/65 R1414x5.5 ET45 4x100TiresRims
195/55 R1515x6 ET45 4x100TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.