Skip to content

1992 Audi 90 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1992 Audi 90.

Bolt pattern
Fitment tables

2 trims sold in 1992

Open a trim for its factory package and every alternative size, front and rear.

Audi 90 B4

1991 – 1995 2 trims

90 2.8 E

172 hp · 2.8L AAH V6 195/65 R15 91V 6 fitments
GenerationB4 1991–1995
Power172 hp
Engine2.8L AAH V6, Petrol
Center bore57.1 mm
PCD4x108
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
195/65 R15 91V15x6 ET37 4x10832TiresRims
205/60 R15 91V15x7 ET37 4x10832TiresRims
205/60 R15 90H15x6 ET37 4x10829TiresRims
205/65 R15 91Q15x7 ET37 4x10832TiresRims
205/55 R16 89V16x7 ET37 4x10835TiresRims
225/45 ZR17 89W17x7.5 ET35 4x10835TiresRims

90 2.8 E quattro

172 hp · 2.8L AAH V6 195/65 R15 91V 6 fitments
GenerationB4 1991–1995
Power172 hp
Engine2.8L AAH V6, Petrol
Center bore57.1 mm
PCD4x108
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
195/65 R15 91V15x6 ET37 4x10832TiresRims
205/60 R15 91V15x7 ET37 4x10832TiresRims
205/60 R15 90H15x6 ET37 4x10829TiresRims
205/65 R15 91Q15x7 ET37 4x10832TiresRims
205/55 R16 89V16x7 ET37 4x10835TiresRims
225/45 ZR17 89W17x7.5 ET35 4x10835TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.