Skip to content

1994 Audi A8 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1994 Audi A8.

Fitment tables

5 trims sold in 1994

Open a trim for its factory package and every alternative size, front and rear.

Audi A8 D2

1994 – 2002 Europe market 5 trims

A8 2.8i

190 hp · 2.8L V6 225/60 R16 98V 2 fitments
GenerationD2 1994–2002
Power190 hp
Engine2.8L V6, Petrol
Center bore57.1 mm
PCD5x112
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
225/60 R16 98V16x7 ET42 5x11229TiresRims
225/55 ZR17 98W17x7.5 ET46 5x11232TiresRims

A8 3.3TDi

222 hp · V8 225/55 ZR17 98W 2 fitments
GenerationD2 1994–2002
Power222 hp
EngineV8, Diesel
Center bore57.1 mm
PCD5x112
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
225/55 ZR17 98W17x8 ET48 5x11232TiresRims
245/50 ZR17 98W17x8 ET48 5x11233TiresRims

A8 3.7i

256 hp · 3.7L V8 245/45 ZR18 97W 2 fitments
GenerationD2 1994–2002
Power256 hp
Engine3.7L V8, Petrol
Center bore57.1 mm
PCD5x112
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
245/45 ZR18 97W18x8 ET48 5x11235TiresRims
245/40 ZR19 96Y19x8.5 ET43 5x11236TiresRims

A8 4.2i

296 hp · 4.2L V8 245/45 R18 97W 2 fitments
GenerationD2 1994–2002
Power296 hp
Engine4.2L V8, Petrol
Center bore57.1 mm
PCD5x112
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
245/45 R18 97W18x8 ET48 5x11235TiresRims
245/40 ZR19 96Y19x8.5 ET43 5x11236TiresRims

A8 6.0i

414 hp · W12 245/45 ZR18 97W 3 fitments
GenerationD2 1994–2002
Power414 hp
EngineW12, Petrol
Center bore57.1 mm
PCD5x112
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
245/45 ZR18 97W18x8 ET48 5x11235TiresRims
255/40 ZR19 96Y19x8.5 ET43 5x11236TiresRims
255/35 ZR20 96Y20x9 ET41 5x11239TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.