2019 Audi RS Q3 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2019 Audi RS Q3.

2019 Audi RS Q3 tire sizes

225/50R18 225/50R19 255/40R19 255/35R20 255/40R20 265/35R20 255/35R21 265/30R21

Bolt pattern

5x112

2 generations were sold in 2019. Check your chassis code before ordering wheels.

Other years

2015 2016 2017 2018 2019 2020 2021 2022 All 2013–2025

Fitment tables

2 trims sold in 2019

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Audi RS Q3 F3

2019 – 2023 Europe market 1 trim

RS Q3 2.5 TFSi quattro

394 hp · 2.5L DNWA I5 255/40 ZR20 101Y 4 fitments

GenerationF3 2019–2023

MarketEurope

Power394 hp

Engine2.5L DNWA I5, Petrol

Center bore57.1 mm

PCD5x112

ThreadM14 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
255/40 ZR20 101Y	20x8.5 ET38 ~~5x112~~	–	Tires Rims
225/50 R19 100V	19x7.5 ET38 ~~5x112~~	–	Tires Rims
255/40 ZR20 100W	20x8.5 ET38 ~~5x112~~	–	Tires Rims
255/35 ZR21 98Y	21x8.5 ET38 ~~5x112~~	–	Tires Rims

Audi RS Q3 8U Facelift

2015 – 2018 Europe market 1 trim

RS Q3 2.5TFSi performance (ABA-8UCZGF)

362 hp · I5 255/35 ZR20 97Y 5 fitments

Generation8U Facelift 2015–2018

MarketJapan

Power362 hp

EngineI5, Petrol

Center bore57.1 mm

PCD5x112

ThreadM14 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
255/35 ZR20 97Y	20x8.5 ET36 ~~5x112~~	39	Tires Rims
225/50 R18 99H	18x8 ET34 ~~5x112~~	33	Tires Rims
255/40 ZR19 100Y	19x8.5 ET36 ~~5x112~~	33	Tires Rims
265/35 ZR20 97Y	20x9 ET33 ~~5x112~~	39	Tires Rims
265/30 ZR21 96Z	21x9 ET31 ~~5x112~~	41	Tires Rims

Reading the table

What these columns mean

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.