Skip to content

2022 Audi RS Q8 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2022 Audi RS Q8.

2022 Audi RS Q8 tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2022

Open a trim for its factory package and every alternative size, front and rear.

Audi RS Q8 4M

2019 – 2024 2 trims

RS Q8 4.0 TFSi quattro

591 hp · 4.0L DHU V8 295/40 ZR22 112Y 4 fitments
Generation4M 2019–2024
MarketEurope
Power591 hp
Engine4.0L DHU V8, Petrol
Center bore66.5 mm
PCD5x112
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
295/40 ZR22 112Y22x10 ET18 5x112–TiresRims
275/40 R22 108V22x10 ET18 5x112–TiresRims
295/35 ZR23 108Y23x10.5 ET18 5x112–TiresRims
295/35 ZR23 108W23x10.5 ET18 5x112–TiresRims

RS Q8 4.0 TFSi quattro (3AA-F1DHUA)

591 hp · 4.0L DHU V8 295/35 ZR23 108Y 4 fitments
Generation4M 2019–2024
MarketJapan
Power591 hp
Engine4.0L DHU V8, Petrol
Center bore66.5 mm
PCD5x112
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
295/35 ZR23 108Y23x10.5 ET18 5x112–TiresRims
275/40 R22 108V22x10 ET18 5x112–TiresRims
295/40 ZR22 112Y22x10 ET18 5x112–TiresRims
295/35 R23 108W23x10.5 ET18 5x112–TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.