2011 Audi RS3 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2011 Audi RS3.

2011 Audi RS3 tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2011 – 2012 1 trim

335 hp · 2.5L CEPA I5 235/35 ZR19 91Y / 225/35 ZR19 88Y 6 fitments

Generation8P 2011–2012

Power335 hp

Engine2.5L CEPA I5, Petrol

Center bore57.1 mm

PCD5x112

ThreadM14 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
Front235/35 ZR19 91Y	19x8 ET50 ~~5x112~~	39	Tires Rims
Rear225/35 ZR19 88Y	19x8 ET50 ~~5x112~~	39	Tires Rims
Front255/30 ZR19 91Y	19x8.5 ET53 ~~5x112~~	39	Tires Rims
Rear235/35 ZR19 91Y	19x8 ET50 ~~5x112~~	39	Tires Rims
225/40 R18 92V	18x8 ET50 ~~5x112~~	39	Tires Rims
225/35 R19 88W	19x8 ET50 ~~5x112~~	39	Tires Rims
235/35 ZR19 91Y	19x8 ET50 ~~5x112~~	39	Tires Rims
235/35 R19 91W	19x8 ET50 ~~5x112~~	39	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.