Skip to content

2023 Audi RS4 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2023 Audi RS4.

2023 Audi RS4 tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2023

Open a trim for its factory package and every alternative size, front and rear.

Audi RS4 B9 Facelift

2019 – 2025 Europe market 2 trims

RS4 2.9 TFSi quattro (Avant, 5d)

444 hp · 2.9 L DECA V6 Petrol 2.9 L DECA V6 265/35 ZR19 3 fitments
GenerationB9 Facelift 2019–2025
MarketEurope
Power444 hp
Engine2.9 L DECA V6 Petrol 2.9 L DECA V6, Petrol
Center bore66.5 mm
PCD5x112
ThreadM14 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE265/35 ZR1919x9 ET24 5x112–TiresRims
OE275/30 ZR2020x9 ET26 5x11236TiresRims
Alt235/40 R1919x8 ET26 5x112–TiresRims

RS4 2.9 TFSi quattro 3BA-8WDECF (Avant, 5d)

444 hp · 2.9 L DEC V6 Petrol 2.9 L DEC V6 275/30 ZR20 3 fitments
GenerationB9 Facelift 2019–2025
MarketJapan
Power444 hp
Engine2.9 L DEC V6 Petrol 2.9 L DEC V6, Petrol
Center bore66.5 mm
PCD5x112
ThreadM14 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE275/30 ZR2020x9 ET26 5x11236TiresRims
Alt235/40 R1919x8 ET26 5x112–TiresRims
Alt265/35 ZR1919x9 ET24 5x112–TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.