2012 Audi S3 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2012 Audi S3.

2012 Audi S3 tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2006 – 2013 1 trim

261 hp · 2.0L BHZ CDLA I4 225/40 ZR18 92Y 3 fitments

Generation8P 2006–2013

Power261 hp

Engine2.0L BHZ CDLA I4, Petrol

Center bore57.1 mm

PCD5x112

ThreadM14 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
225/40 ZR18 92Y	18x7.5 ET56 ~~5x112~~	–	Tires Rims
205/50 R17 93H	17x6 ET48 ~~5x112~~	–	Tires Rims
225/45 R17 94V	17x7.5 ET56 ~~5x112~~	–	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.