Skip to content

2024 Audi S3 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2024 Audi S3.

2024 Audi S3 tire sizes

Bolt pattern

2 generations were sold in 2024. Check your chassis code before ordering wheels.

Fitment tables

3 trims sold in 2024

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Audi S3 8Y Facelift

2024 – 2027 1 trim

S3 2.0 TFSi quattro

329 hp · 2.0 L Petrol 2.0 L 225/40 ZR18 4 fitments
Generation8Y Facelift 2024–2027
MarketUSA
Power329 hp
Engine2.0 L Petrol 2.0 L, Petrol
Center bore57.1 mm
PCD5x112
ThreadM14 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE225/40 ZR1818x8 ET46 5x11242 F / 39 RTiresRims
OE235/35 ZR1919x8 ET49 5x11242 F / 39 RTiresRims
Alt225/40 R1818x7.5 ET51 5x11245 F / 41 RTiresRims
Alt225/40 R1818x8 ET46 5x11245 F / 41 RTiresRims

Audi S3 8Y

2020 – 2024 2 trims

S3 2.0 TFSi quattro

306 hp · 2.0 L Petrol 2.0 L x / 225/40 ZR18 5 fitments
Generation8Y 2020–2024
MarketUSA
Power306 hp
Engine2.0 L Petrol 2.0 L, Petrol
Center bore57.1 mm
PCD5x112
ThreadM14 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OEFrontx 5x112Tires
Rear225/40 ZR1818x8 ET46 5x112TiresRims
AltFrontx 5x112Tires
Rear205/50 R1717x6.5 ET43 5x112TiresRims
AltFrontx 5x112Tires
Rear225/45 R1717x8 ET46 5x112TiresRims
AltFrontx 5x112Tires
Rear225/40 R1818x8 ET46 5x112TiresRims
AltFrontx 5x112Tires
Rear235/35 ZR1919x8 ET49 5x112TiresRims

S3 2.0 TFSi quattro (3BA-GYDNFF)

306 hp · 2.0 L Petrol 2.0 L x 5 fitments
Generation8Y 2020–2024
MarketJapan
Power306 hp
Engine2.0 L Petrol 2.0 L, Petrol
Center bore57.1 mm
PCD5x112
ThreadM14 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OEx 5x112Tires
Altx 5x112Tires
Altx 5x112Tires
Altx 5x112Tires
Altx 5x112Tires
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.