Skip to content

2009 Audi S4 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2009 Audi S4.

Bolt pattern

2 generations were sold in 2009. Check your chassis code before ordering wheels.

Fitment tables

3 trims sold in 2009

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Audi S4 B8

2009 – 2012 2 trims

S4 3.0 TFSi quattro

329 hp · 3.0L CAKA V6 245/40 ZR18 94Y 3 fitments
GenerationB8 2009–2012
MarketEurope
Power329 hp
Engine3.0L CAKA V6, Petrol
Center bore66.5 mm
PCD5x112
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
245/40 ZR18 94Y18x8 ET47 5x11233TiresRims
255/35 ZR19 94Y19x8.5 ET43 5x11235TiresRims
255/30 ZR20 92Z20x8.5 ET41 5x11236TiresRims

S4 3.0TFSi (ABA-8KCAKF)

329 hp · 3.0L CAK V6 245/40 ZR18 94Y 3 fitments
GenerationB8 2009–2012
MarketJapan
Power329 hp
Engine3.0L CAK V6, Petrol
Center bore66.5 mm
PCD5x112
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
245/40 ZR18 94Y18x8 ET47 5x11233TiresRims
255/35 ZR19 94Y19x8.5 ET43 5x11235TiresRims
255/30 ZR20 92Z20x8.5 ET41 5x11236TiresRims

Audi S4 B7

2005 – 2009 1 trim

S4 4.2i

340 hp · 4.2L V8 235/40 ZR18 95Y 3 fitments
GenerationB7 2005–2009
MarketUSA
Power340 hp
Engine4.2L V8, Petrol
Center bore57.1 mm
PCD5x112
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
235/40 ZR18 95Y18x8 ET45 5x11236TiresRims
235/35 ZR19 95Y19x8 ET43 5x11236TiresRims
255/30 ZR19 95Y19x8.5 ET41 5x11239TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.