1994 Audi S6 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1994 Audi S6.

1994 Audi S6 tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1994 – 1997 Europe market 2 trims

227 hp · 2.2L AAN I5 195/65 R15 91T 4 fitments

GenerationC4 1994–1997

Power227 hp

Engine2.2L AAN I5, Petrol

Center bore57.1 mm

PCD5x112

ThreadM14 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
195/65 R15 91T	15x7 ET40 ~~5x112~~	33	Tires Rims
215/60 ZR15 93Z	15x7.5 ET40 ~~5x112~~	35	Tires Rims
225/50 ZR16 93Z	16x7.5 ET35 ~~5x112~~	36	Tires Rims
245/40 ZR17 93Z	17x8 ET40 ~~5x112~~	38	Tires Rims

286 hp · V8 215/60 R15 93T 4 fitments

GenerationC4 1994–1997

Power286 hp

EngineV8, Petrol

Center bore57.1 mm

PCD5x112

ThreadM14 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
215/60 R15 93T	15x7.5 ET40 ~~5x112~~	33	Tires Rims
225/50 ZR16 93Z	16x8 ET40 ~~5x112~~	36	Tires Rims
225/45 ZR17 93Z	17x8 ET40 ~~5x112~~	36	Tires Rims
255/40 ZR17 93Z	17x8.5 ET37 ~~5x112~~	38	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.