Skip to content

2015 Audi S6 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2015 Audi S6.

2015 Audi S6 tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2015

Open a trim for its factory package and every alternative size, front and rear.

Audi S6 C7 Facelift

2014 – 2018 Europe market 2 trims

S6 4.0TFSi

444 hp · 4.0L CTGE V8 255/40 ZR19 100Y 4 fitments
GenerationC7 Facelift 2014–2018
MarketEurope
Power444 hp
Engine4.0L CTGE V8, Petrol
Center bore66.5 mm
PCD5x112
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
255/40 ZR19 100Y19x8.5 ET45 5x11235TiresRims
235/45 R19 99V19x7.5 ET33 5x11235TiresRims
255/35 ZR20 98Z20x8.5 ET45 5x11238TiresRims
265/30 ZR21 98Z21x9 ET35 5x11238TiresRims

S6 4.0TFSi (ABA-4GCTGA)

444 hp · CTG V8 255/35 ZR20 98Z 4 fitments
GenerationC7 Facelift 2014–2018
MarketJapan
Power444 hp
EngineCTG V8, Petrol
Center bore66.5 mm
PCD5x112
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
255/35 ZR20 98Z20x8.5 ET45 5x11238TiresRims
235/45 R19 99V19x7.5 ET33 5x11235TiresRims
255/40 ZR19 100Y19x8.5 ET45 5x11235TiresRims
265/30 ZR21 98Z21x9 ET35 5x11238TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.