2012 Audi S7 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2012 Audi S7.

2012 Audi S7 tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2012 – 2015 Europe market 2 trims

414 hp · 4.0L CEUC V8 255/40 ZR19 100Y 5 fitments

Generation4G8 2012–2015

MarketEurope

Power414 hp

Engine4.0L CEUC V8, Petrol

Center bore66.5 mm

PCD5x112

ThreadM14 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
255/40 ZR19 100Y	19x8.5 ET32 ~~5x112~~	36	Tires Rims
235/45 R19 99V	19x8 ET26 ~~5x112~~	35	Tires Rims
255/40 ZR19 100Y	19x9 ET32 ~~5x112~~	36	Tires Rims
265/35 ZR20 100Y	20x9 ET37 ~~5x112~~	39	Tires Rims
275/30 ZR21 99Z	21x9 ET35 ~~5x112~~	41	Tires Rims

414 hp · V8 265/35 ZR20 100Y 2 fitments

Generation4G8 2012–2015

MarketJapan

Power414 hp

EngineV8, Petrol

Center bore66.5 mm

PCD5x112

ThreadM14 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
265/35 ZR20 100Y	20x9 ET37 ~~5x112~~	39	Tires Rims
275/30 ZR21 99Z	21x9 ET35 ~~5x112~~	41	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.