2000 Audi S8 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2000 Audi S8.

2000 Audi S8 tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1996 – 2003 Europe market 1 trim

355 hp · 4.2L AQH AVP AYS BCS V8 245/45 ZR18 97W 5 fitments

GenerationD2 1996–2003

Power355 hp

Engine4.2L AQH AVP AYS BCS V8, Petrol

Center bore57.1 mm

PCD5x112

ThreadM14 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
245/45 ZR18 97W	18x8 ET48 ~~5x112~~	35	Tires Rims
255/45 ZR18 97W	18x8.5 ET45 ~~5x112~~	36	Tires Rims
255/40 ZR19 97Y	19x8.5 ET41 ~~5x112~~	38	Tires Rims
255/35 ZR20 96Z	20x8.5 ET41 ~~5x112~~	39	Tires Rims
265/35 ZR20 96Z	20x9 ET38 ~~5x112~~	39	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.