Skip to content

2002 Audi TT tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2002 Audi TT.

Bolt pattern
Fitment tables

4 trims sold in 2002

Open a trim for its factory package and every alternative size, front and rear.

Audi TT 8N

1998 – 2006 Europe market 4 trims

TT 1.8T

222 hp · 1.8L APX BAM BEA I4 205/55 R16 89V 3 fitments
Generation8N 1998–2006
Power222 hp
Engine1.8L APX BAM BEA I4, Petrol
Center bore57.1 mm
PCD5x100
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/55 R16 89V16x7 ET31 5x10030TiresRims
205/50 R17 89V17x7 ET31 5x10032TiresRims
205/45 ZR18 88Z18x7 ET31 5x10035TiresRims

TT 1.8T

148 hp · AUM I4 205/55 R16 89V 3 fitments
Generation8N 1998–2006
Power148 hp
EngineAUM I4, Petrol
Center bore57.1 mm
PCD5x100
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/55 R16 89V16x7 ET31 5x10030TiresRims
205/50 R17 89V17x7 ET31 5x10032TiresRims
205/45 ZR18 88Z18x7 ET31 5x10035TiresRims

TT 1.8T

178 hp · 1.8L AJQ I4 205/55 R16 89V 3 fitments
Generation8N 1998–2006
Power178 hp
Engine1.8L AJQ I4, Petrol
Center bore57.1 mm
PCD5x100
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/55 R16 89V16x7 ET31 5x10030TiresRims
205/50 R17 89V17x7 ET31 5x10032TiresRims
205/45 ZR18 88Z18x7 ET31 5x10035TiresRims

TT 1.8T sport

237 hp · I4 225/50 R16 89V 3 fitments
Generation8N 1998–2006
Power237 hp
EngineI4, Petrol
Center bore57.1 mm
PCD5x100
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
225/50 R16 89V16x7.5 ET32 5x10032TiresRims
225/45 ZR17 88Z17x7.5 ET32 5x10035TiresRims
235/40 ZR18 88Z18x8 ET33 5x10035TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.