Skip to content

2012 Audi TT tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2012 Audi TT.

Bolt pattern
Fitment tables

3 trims sold in 2012

Open a trim for its factory package and every alternative size, front and rear.

Audi TT 8J

2006 – 2014 Europe market 3 trims

TT 1.8TFSi

158 hp · 1.8L CDAA I4 225/55 R16 95H 6 fitments
Generation8J 2006–2014
Power158 hp
Engine1.8L CDAA I4, Petrol
Center bore57.1 mm
PCD5x112
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
225/55 R16 95H16x7 ET47 5x1121.8TiresRims
225/55 ZR16 95W16x7.5 ET45 5x1121.8TiresRims
225/50 R17 94H17x7 ET47 5x1121.8TiresRims
225/50 ZR17 94W17x8 ET47 5x1121.8TiresRims
245/45 ZR17 95W17x8.5 ET50 5x1121.8TiresRims
245/40 ZR18 93W18x9 ET52 5x1121.8TiresRims

TT 2.0TDi

168 hp · CBBB CFGB I4 225/55 R16 95H 6 fitments
Generation8J 2006–2014
Power168 hp
EngineCBBB CFGB I4, Diesel
Center bore57.1 mm
PCD5x112
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
225/55 R16 95H16x7 ET47 5x1121.8TiresRims
225/55 ZR16 95W16x7.5 ET45 5x1121.8TiresRims
225/50 R17 94H17x7 ET47 5x1121.8TiresRims
225/50 ZR17 94W17x8 ET47 5x1121.8TiresRims
245/45 ZR17 95W17x8.5 ET50 5x1121.8TiresRims
245/40 ZR18 93W18x9 ET52 5x1121.8TiresRims

TT 2.0TFSi

208 hp · 2.0L CESA CETA I4 225/50 R17 95H 6 fitments
Generation8J 2006–2014
Power208 hp
Engine2.0L CESA CETA I4, Petrol
Center bore57.1 mm
PCD5x112
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
225/50 R17 95H17x7 ET47 5x1121.8TiresRims
225/50 ZR17 94W17x8 ET47 5x1121.8TiresRims
245/45 R17 95V17x8.5 ET50 5x1121.8TiresRims
245/45 ZR17 95Y17x8.5 ET50 5x1121.8TiresRims
245/40 ZR18 93Y18x9 ET52 5x1121.8TiresRims
255/35 ZR19 96Y19x9 ET52 5x1121.8TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.