Skip to content

2025 BAIC X7 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2025 BAIC X7.

2025 BAIC X7 tire sizes

Bolt pattern

2 generations were sold in 2025. Check your chassis code before ordering wheels.

Fitment tables

2 trims sold in 2025

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

BAIC X7 BAIC Beijing X7 Facelift

2024 – 2027 1 trim

X7 1.5T

185 hp · 1.5 L Petrol 1.5 L 235/60 R18 2 fitments
GenerationBAIC Beijing X7 Facelift 2024–2027
MarketEurope
Power185 hp
Engine1.5 L Petrol 1.5 L, Petrol
Center bore67.1 mm
PCD5x110
ThreadM12 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE235/60 R1818x7 5x110–TiresRims
OE235/55 R1919x7 5x110–TiresRims

BAIC X7 BAIC Beijing X7

2020 – 2027 1 trim

X7 1.5T

177 hp · 1.5 L Petrol 1.5 L 235/60 R18 2 fitments
GenerationBAIC Beijing X7 2020–2027
MarketEurope
Power177 hp
Engine1.5 L Petrol 1.5 L, Petrol
Center bore67.1 mm
PCD5x110
ThreadM12 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE235/60 R1818x7 5x110–TiresRims
OE235/55 R1919x7 5x110–TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.