Skip to content

2005 Bentley Azure tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2005 Bentley Azure.

2005 Bentley Azure tire sizes

Bolt patterns

2 generations were sold in 2005. Check your chassis code before ordering wheels.

Fitment tables

2 trims sold in 2005

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Bentley Azure II

2005 – 2009 1 trim

Azure 6.75T

451 hp · 6.8L V8 255/50 R18 1 fitment
GenerationII 2005–2009
Power451 hp
Engine6.8L V8, Petrol
Center bore72.6 mm
PCD5x120
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
255/50 R1818x8 ET55 5x120TiresRims

Bentley Azure I

1995 – 2005 1 trim

Azure 6.75T

402 hp · 6.8L L 410 M1T2 V8 255/50 R18 1 fitment
GenerationI 1995–2005
Power402 hp
Engine6.8L L 410 M1T2 V8, Petrol
Center bore117.6 mm
PCD5x154.94
Thread1/2" - 20 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
255/50 R1818x8 ET55 5x154.94TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.