Skip to content

2023 Bentley Continental GT tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2023 Bentley Continental GT.

2023 Bentley Continental GT tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2023

Open a trim for its factory package and every alternative size, front and rear.

Bentley Continental GT III

2018 – 2024 2 trims

Continental GT 4.0T

542 hp · 4.0 L V8 Petrol 4.0 L V8 265/45 ZR20 / 295/40 ZR20 5 fitments
GenerationIII 2018–2024
MarketUSA
Power542 hp
Engine4.0 L V8 Petrol 4.0 L V8, Petrol
Center bore71.6 mm
PCD5x130
ThreadM14 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OEFront265/45 ZR2020x9 5x130TiresRims
Rear295/40 ZR2020x10.5 5x130TiresRims
OEFront265/40 ZR2121x9 ET61 5x130TiresRims
Rear305/35 ZR2121x10.5 ET52 5x130TiresRims
AltFront265/40 ZR2121x9.5 ET68 5x130TiresRims
Rear305/35 ZR2121x11 ET59 5x130TiresRims
AltFront275/35 ZR2222x9 ET64 5x130TiresRims
Rear315/30 ZR2222x10.5 ET55 5x130TiresRims
AltFront275/35 ZR2222x9.5 ET71 5x130TiresRims
Rear315/30 ZR2222x11 ET62 5x130TiresRims

Continental GT 6.0T

650 hp · 6.0 L DDBD W12 Petrol 6.0 L DDBD W12 275/35 ZR22 / 315/30 ZR22 4 fitments
GenerationIII 2018–2024
MarketUSA
Power650 hp
Engine6.0 L DDBD W12 Petrol 6.0 L DDBD W12, Petrol
Center bore71.6 mm
PCD5x130
ThreadM14 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OEFront275/35 ZR2222x9 ET64 5x130TiresRims
Rear315/30 ZR2222x10.5 ET55 5x130TiresRims
AltFront265/40 ZR2121x9 ET61 5x130TiresRims
Rear305/35 ZR2121x10.5 ET52 5x130TiresRims
AltFront265/40 ZR2121x9.5 ET68 5x130TiresRims
Rear305/35 ZR2121x11 ET59 5x130TiresRims
AltFront275/35 ZR2222x9.5 ET71 5x130TiresRims
Rear315/30 ZR2222x11 ET62 5x130TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.