Skip to content

2019 Bentley Continental GTC tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2019 Bentley Continental GTC.

2019 Bentley Continental GTC tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2019

Open a trim for its factory package and every alternative size, front and rear.

Bentley Continental GTC III

2019 – 2024 2 trims

Continental GTC 4.0T

542 hp · 4.0L V8 265/40 ZR21 105Y / 305/35 ZR21 109Y 2 fitments
GenerationIII 2019–2024
Power542 hp
Engine4.0L V8, Petrol
Center bore71.6 mm
PCD5x130
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
Front265/40 ZR21 105Y21x9.5 ET68 5x130TiresRims
Rear305/35 ZR21 109Y21x11 ET59 5x130TiresRims
Front275/35 ZR22 104Y22x9.5 ET71 5x130TiresRims
Rear315/30 ZR22 107Y22x11 ET62 5x130TiresRims

Continental GTC 6.0T

626 hp · 6.0L DDBD W12 265/40 ZR21 105Y / 305/35 ZR21 109Y 2 fitments
GenerationIII 2019–2024
Power626 hp
Engine6.0L DDBD W12, Petrol
Center bore71.6 mm
PCD5x130
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
Front265/40 ZR21 105Y21x9.5 ET68 5x130TiresRims
Rear305/35 ZR21 109Y21x11 ET59 5x130TiresRims
Front275/35 ZR22 104Y22x9.5 ET71 5x130TiresRims
Rear315/30 ZR22 107Y22x11 ET62 5x130TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.