Skip to content

2000 Bentley Continental tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2000 Bentley Continental.

2000 Bentley Continental tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2000

Open a trim for its factory package and every alternative size, front and rear.

Bentley Continental Continental

1991 – 2002 2 trims

Continental R 6.75

402 hp · 6.8L V8 255/55 R17 108V 5 fitments
GenerationContinental 1991–2002
Power402 hp
Engine6.8L V8, Petrol
Center bore117.6 mm
PCD5x154.94
Thread1/2" - 20 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
255/55 R17 108V17x7.5 ET41 5x154.94–TiresRims
255/55 ZR17 102Z17x8 ET61 5x154.94–TiresRims
255/50 ZR18 102Y18x7.5 ET53 5x154.94–TiresRims
285/45 ZR18 103Y18x8 ET61 5x154.94–TiresRims
285/45 ZR18 103Y18x9.5 ET61 5x154.94–TiresRims

Continental T 6.75

420 hp · 6.8L V8 275/55 ZR15 104Z 4 fitments
GenerationContinental 1991–2002
Power420 hp
Engine6.8L V8, Petrol
Center bore117.6 mm
PCD5x154.94
Thread1/2" - 20 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
275/55 ZR15 104Z15x7.5 ET63 5x154.94–TiresRims
255/55 ZR17 102W17x7.5 ET41 5x154.94–TiresRims
255/50 ZR18 102Y18x7.5 ET53 5x154.94–TiresRims
285/45 ZR18 103Y18x8 ET61 5x154.94–TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.