Skip to content

2019 Bentley Mulsanne tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2019 Bentley Mulsanne.

2019 Bentley Mulsanne tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2019

Open a trim for its factory package and every alternative size, front and rear.

Bentley Mulsanne II Facelift

2016 – 2020 2 trims

Mulsanne 6.75T

506 hp · 6.75L V8 265/35 ZR22 102Y / 265/35 ZR22 102Y 3 fitments
GenerationII Facelift 2016–2020
Power506 hp
Engine6.75L V8, Petrol
Center bore71.6 mm
PCD5x130
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
Front265/35 ZR22 102Y22x9 ET61 5x13042TiresRims
Rear265/35 ZR22 102Y22x9.5 ET61 5x13035TiresRims
265/45 ZR20 108Y20x9 ET61 5x1302.4TiresRims
265/40 ZR21 105Y21x9 ET61 5x1302.4TiresRims

Mulsanne 6.75T

530 hp · 6.75L V8 265/35 ZR22 102Y / 265/35 ZR22 102Y 3 fitments
GenerationII Facelift 2016–2020
Power530 hp
Engine6.75L V8, Petrol
Center bore71.6 mm
PCD5x130
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
Front265/35 ZR22 102Y22x9 ET61 5x13042TiresRims
Rear265/35 ZR22 102Y22x9.5 ET61 5x13035TiresRims
265/45 ZR20 108Y20x9 ET61 5x1302.4TiresRims
265/40 ZR21 105Y21x9 ET61 5x1302.4TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.