Skip to content

2021 Bestune T77 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2021 Bestune T77.

2021 Bestune T77 tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2021

Open a trim for its factory package and every alternative size, front and rear.

Bestune T77 T77

2018 – 2024 2 trims

T77 1.2 T

141 hp · 1.2 L CA4GA12TD I4 Petrol 1.2 L CA4GA12TD I4 215/60 R17 3 fitments
GenerationT77 2018–2024
MarketChina
Power141 hp
Engine1.2 L CA4GA12TD I4 Petrol 1.2 L CA4GA12TD I4, Petrol
Center bore57.1 mm
PCD5x100
ThreadM14 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE215/60 R1717x7 ET28 5x10029TiresRims
OE215/55 R1818x7 ET28 5x10029TiresRims
Alt225/45 R1919x7.5 ET28 5x10029TiresRims

T77 1.5 T

166 hp · 1.5 L CA4GB15TD-30 CA4GB15TD I4 Petrol 1.5 L CA4GB15TD-30 CA4GB15TD I4 215/55 R18 2 fitments
GenerationT77 2018–2024
MarketChina
Power166 hp
Engine1.5 L CA4GB15TD-30 CA4GB15TD I4 Petrol 1.5 L CA4GB15TD-30 CA4GB15TD I4, Petrol
Center bore57.1 mm
PCD5x100
ThreadM14 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE215/55 R1818x7 ET28 5x10029TiresRims
OE225/45 R1919x7.5 ET28 5x10029TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.