1996 BMW Alpina B10 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1996 BMW Alpina B10.

1996 BMW Alpina B10 tire sizes

235/45R17 265/40R17 235/40R18 265/35R18

Bolt pattern

5x120

2 generations were sold in 1996. Check your chassis code before ordering wheels.

Other years

1992 1993 1994 1995 1996 1997 1998 1999 All 1988–2004

Fitment tables

2 trims sold in 1996

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

BMW Alpina B10 E39

1996 – 2004 1 trim

B10 B10 4.6

335 hp · 4.6L M62B46 V8 235/40 ZR18 91Y / 265/35 ZR18 93Y 1 fitment

GenerationE39 1996–2004

Power335 hp

Engine4.6L M62B46 V8, Petrol

Center bore74.1 mm

PCD5x120

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
Front235/40 ZR18 91Y	18x8 ET20 ~~5x120~~	38	Tires Rims
Rear265/35 ZR18 93Y	18x9 ET24 ~~5x120~~	38	Tires Rims

BMW Alpina B10 E34

1988 – 1996 1 trim

B10 B10 3.0

228 hp · M30B30 I6 235/45 ZR17 93Y / 265/40 ZR17 96Y 2 fitments

GenerationE34 1988–1996

Power228 hp

EngineM30B30 I6, Petrol

Center bore72.6 mm

PCD5x120

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
Front235/45 ZR17 93Y	17x8.5 ET12 ~~5x120~~	38	Tires Rims
Rear265/40 ZR17 96Y	17x9.5 ET24 ~~5x120~~	38	Tires Rims
Front235/45 ZR17 93Y	17x8.5 ET14 ~~5x120~~	38	Tires Rims
Rear265/40 ZR17 96Y	17x10 ET28 ~~5x120~~	38	Tires Rims

Reading the table

What these columns mean

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.