1989 BMW Alpina B3 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1989 BMW Alpina B3.

1989 BMW Alpina B3 tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1987 – 1992 1 trim

201 hp · M20B27 I6 205/50 ZR16 / 225/45 ZR16 2 fitments

GenerationE30 1987–1992

Power201 hp

EngineM20B27 I6, Petrol

Center bore57.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
Front205/50 ZR16	16x7 ET28 ~~4x100~~	32	Tires Rims
Rear225/45 ZR16	16x8 ET28 ~~4x100~~	32	Tires Rims
195/50 R16 88V	16x7 ET28 ~~4x100~~	32	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.