Skip to content

2005 BMW Alpina B5 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2005 BMW Alpina B5.

2005 BMW Alpina B5 tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2005

Open a trim for its factory package and every alternative size, front and rear.

BMW Alpina B5 E60/E61

2005 – 2010 2 trims

B5 B5

493 hp · N62B44A19 V8 245/40 ZR19 / 275/35 ZR19 3 fitments
GenerationE60/E61 2005–2010
MarketEurope
Power493 hp
EngineN62B44A19 V8, Petrol
Center bore72.6 mm
PCD5x120
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
Front245/40 ZR1919x8.5 ET20 5x120–TiresRims
Rear275/35 ZR1919x9.5 ET24 5x120–TiresRims
Front245/35 ZR2020x8.5 ET18 5x120–TiresRims
Rear285/30 ZR2020x9.5 ET24 5x120–TiresRims
245/45 R18 100V18x8 ET20 5x120–TiresRims

B5 B5 (ABA-RH12)

503 hp · V8 245/40 ZR19 / 275/35 ZR19 3 fitments
GenerationE60/E61 2005–2010
MarketJapan
Power503 hp
EngineV8, Petrol
Center bore72.6 mm
PCD5x120
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
Front245/40 ZR1919x8.5 ET20 5x120–TiresRims
Rear275/35 ZR1919x9.5 ET24 5x120–TiresRims
Front245/35 ZR2020x8.5 ET18 5x120–TiresRims
Rear285/30 ZR2020x9.5 ET24 5x120–TiresRims
245/45 R18 100V18x8 ET20 5x120–TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.