1992 BMW Alpina B6 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1992 BMW Alpina B6.

1992 BMW Alpina B6 tire sizes

235/40R17 265/35R17

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1992 – 1993 1 trim

237 hp · M30B28 I6 235/40 ZR17 90Z / 265/35 ZR17 92Z 1 fitment

GenerationE36 1992–1993

Power237 hp

EngineM30B28 I6, Petrol

Center bore72.6 mm

PCD5x120

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
Front235/40 ZR17 90Z	17x8 ET46 ~~5x120~~	32	Tires Rims
Rear265/35 ZR17 92Z	17x9 ET46 ~~5x120~~	32	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.